Have you noticed water pooling around your hot water heater? If you have, it may be due to a corroded tank or a loose valve seeping out water. Leak detection in Temecula for water heaters may also be a bit misleading, as a drip may indicate a leak, or be due to condensation due to the tank filling with cold water. The fact is that you should work to determine the cause, to ensure that if a problem exists it does not become worse.
If you have ruled out that the leak in your water heater is not the result of condensation, you must check some of the other parts of the unit. Here are a few tips for water heater Leak detection in Temecula.
TPR -; Temperature Pressure Relief Valve
The TPR may be the offending part causing the leak in your water heater. It may be leaking water when there is excess water in the tank. This excessive pressure may be the result of:
* Temperatures set too high;
* Strong pressure from the incoming supply of water.
If a TPR valve is to blame for your leak, you need to contact a professional plumber right away; if it is left untreated it may lead to the explosion of the tank.
Drain Valve
If the leaks origin is the drain valve, you will have to replace or tighten this valve.
Heating Element
These are located on electric water heaters and often the source of a leak. Replacing the gasket will usually solve this problem. Prior to replacement of the gasket you need to turn off the power supply to the unit and drain the water from the heater.
Water Pipes
If your pipes are not fastened tightly, they may be the source of the leak. You should begin to tighten the fittings where the water is coming from. If you tighten the fittings and water is still leaking, you will have to replace them completely.
If you have any issues that you are unable to fix, or do not know how to fix, you should call a professional plumber. They have the skills, ability and know-how to get the job done right the first time. Get more info Here.
For latest updates follow us on Facebook.
